1 x Hana Modz V3 Box Mod 1 x Screwdriver Keychain
The DNA 30D has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive. Auto power down
Output Power: 7 - 30 Watts
Output Voltage: 4 - 8.3 Volts
Output Current: 10 Amps
Atomizer Resistance: 0.3 Ohms- 3.3 Ohms
Input Voltage: 3.2 Volts - 4.3 Volts
Input Current: 1.5 Amps - 7 Amps
Height: : 3.43"
Battery must be installed in the proper position. + Positive side of battery towards the top of the device. - Negative side towards the bottom.
Damage can occur if the battery is installed improperly. Warranty will be void if battery is installed incorrectly.
You must have a battery installed to be used as a pass-thru. Damage may occur if a battery is not properly installed. Charge port must be free of any liquid or debris before plugging in the micro USB charge cord. Serious damage can occur if charge area is not free of debris._
DO NOT OVER-TIGHTEN THE ATOMIZER ONTO THE 510 CONNECTOR. THE ATOMIZER SHOULD BE SNUG, NOT TIGHT. OVER-TIGHTENING MAY CAUSE DAMAGE TO THE DELRIN INSULATOR.
The Hana Modz V3 Box Mod has a 180 day warranty against manufacturer defects
For information regarding our terms and conditions for warranty please click here. There you will find warranty information for all of our products.